solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1/ sum __ __ __ screening 2 / __ = not screened tx = tx level txv = txv level s = s level package type _ _ = axial leaded sms = surface mount square tab v oltage/family 60f = 6,000v 70f = 7,000v 80f = 8,000v 90f = 9,000v 100f = 10,000v sum60f thru sum100f and sum60fsms thru sum100fsms 500 ma fast recovery rectifier 6,000 thru 10,000 volts 180 nsec features: ? piv to 10,000 volts ? hermetically sealed axial and square tab surface mount package ? fast recovery 180 nsec maximum 4/ ? void free construction ? metallurgically bonded ? 175c maximum operating temperature ? tx, txv, and s-level screening available 2/ ? also available in fast versions, consult factory maximum ratings 3/ 6/ rating symbol value unit peak inverse voltage sum60f and sum60fsms sum70f and sum70fsms sum80f and sum80fsms sum90f and sum90fsms sum100f and sum100fsms piv 6000 7000 8000 9000 10000 volts average rectified current axial @ l = 3/8? t l 90c t l 125c surface mount t ec 130c t ec 145c i o1 i o2 500 250 ma surge current (1 cycle) i fsm 30 amps operating & stor age temperature 5/ t j and t stg -65 to +175 c typical thermal impedance junction to lead for axial, l =.375" junction to end tab for surface mount r jl r je 15 5 c/w notes: 1/ for ordering information, price, operating curves, and availability- contact factory. 2/ screening based on mil-prf-19500. sc reening flows available on request. 3/ unless otherwise specified, all el ectrical characteristics @25oc. 4/ i f = 500ma, i r = 1a, i rr = 250ma, t a = 25c 5/ maximum lead/end temperature for soldering is 250c, 3/8? from the case for 5 sec. maximum. 6/ operating and testing over 10,000 v/inch may re quire encapsulation or i mmersion in suitable dielectric material. axial leaded sms note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: RC0037E doc
electrical characteristics 3/ 6/ characteristics symbol value unit maximum forward voltage (pulsed) i f = 500 ma v f 13.5 vdc maximum reverse leakage current (v r = rated) (t a = +25c) (t a =+100c) i r1 i r2 1.0 15 a a maximum junction capacitance v r = 100 vdc, f = 1mhz, t a = 25c c j 8 pf maximum reverse recovery time i f = 500ma, i r = 1a, i rr = 250ma, t a = 25c t rr 180 ns package outlines : dimensions (inches) dimensions (inches) dim. minimum maximum dim. minimum maximum a .115 .165 a .170 .180 b --- .310 b .330 .380 c .047 .053 c .020 .030 d 1.00 --- d .002 --- axial sms solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com sum60f thru sum100f and sum60fsms thru sum100fsms note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: RC0037E doc
|
